SUPRALEIK FIX1 is a premixed powder mortar with high resistance indicated for precision anchoring thanks to its high fluidity and the total absence of segregation phenomena.
SUPRALEIK FIX1 guarantees perfect filling of the hollows thanks to the ability to slide even in particularly narrow and difficult to reach spaces. It also has excellent impermeability to water and excellent adhesion to iron and concrete.
SUPRALEIK FIX1 is used for precision anchoring of machinery and metal elements in seats made in suitably cleaned and wet concrete by pouring expansive fluid mortar.
SUPRALEIK FIX1 IS PRODUCED IN COMPLIANCE WITH EN 1504-6.
|AVAILABLE FORMATS - SUPRALEIK FIX1|
|SLFIX20||20 KG||PALLET 1200 KG|
ADVICE FOR USE
The surfaces must be compact, clean, free of dust, crumbly parts and anything else that could compromise good adhesion.
Pour 3.0-3.5 liters of water into the cement mixer. Slowly add SUPRALEIK FIX1 continuously and with the concrete mixer in motion. Mix for about 2 minutes, perfectly remove the undispersed powder and mix again for 2 minutes until a smooth, lump-free mixture is obtained.
Pour SUPRALEIK FIX1 from one side only continuously and taking care to let the air out in the prepared area. It is not necessary to subject the mortar to mechanical vibrations. To facilitate the filling of hard to reach spaces, help yourself where necessary with flexible rods.
Consumption changes from 18 kg/dm³ at 20 kg/dm³
Product for professional use only. Consult the technical and safety data sheet before use. Use at temperatures between +5°C and +35°C. Keep away from humidity, keep in a dry place.
wash with plenty of water.
rinse cautiously with water for several minutes.
remove contact lenses, if present and easy to do. Continue rinsing.
PORTLAND CEMENT- Cr (VI) < 2ppm, may produce an allergic reaction.
LEIK SPA - Via Alessandro Volta 10
46040 - Ponti sul Mincio - Mantova
SUPRALEIK FIX1 - CPR-0101905
Cement mortar for anchoring steel bars
for concrete reinforcement
to the load of 75 kN