Products

SUPRACAP 8

Icon
SUPRACAP 8

SUPRACAP 8 is a premixed fiber-reinforced powder mortar containing special additives and resins designed for bonding and smoothing all types of insulating panels.

SUPRACAP 8 mixed with water forms an easily workable mortar with high resistance to dripping, allowing the installation of large format panels. It is used for bonding insulating panels for sintered expanded polystyrene (eps), extruded polystyrene (xps), glass wool and rock wool directly on plaster or masonry, and coating of thermal insulation panels with interposed mesh fiberglass on interior and exterior walls.

SUPRACAP 8 IS CLASSIFIED GP CS IV ACCORDING TO THE EUROPEAN STANDARD EN 998-1.

AVAILABLE FORMATS - SUPRACAP8 SC1 WHITE *
CODE WEIGHT PROVIDING
SC1W20 20 KG PALLET 1200 KG
AVAILABLE FORMATS - SUPRACAP8 SC2 GREY
CODE WEIGHT PROVIDING
SC2G20 20 KG PALLET 1200 KG

* Color available upon request.

ADVICE FOR USE

Surface preparation

The surfaces must be compact, clean, free of dust, crumbly parts and anything else that could compromise good adhesion.


Mixing

Pour about 5.0 liters of water into a clean container, add a bag of SUPRACAP 8 under mixing and mix with a whip drill for about 3 minutes until a creamy consistency is obtained, easily spreadable and free of lumps.


Application

Apply the SUPRACAP 8 mixture directly on the back of the panel with a 10 mm notched trowel over the entire surface, or for perimeter curbs and central points if the masonry is not flat. After application, press the panels well to ensure perfect adhesion to the support.


Consumption

The consumption is about 4-6 kg/m² for the gluing of the insulating panels according to the application technique and the dimensions of the panels and of about 1.4-1.6 kg/m² per mm of thickness for shaving.


Warnings

Product for professional use only. Consult the technical and safety data sheet before use. Use at temperatures between +5°C and +35°C. Keep away from humidity, keep in a dry place.

WARNINGS

Warnings
Danger H318
Causes serious eye damage.
H315
Causes skin irritation.
H335
May cause respiratory irritation.
H317
May cause an allergic skin reaction.
P261
Avoid breathing dust.
P280
Wear protective gloves/ protective clothing / eye protection / face protection.
P302+P352
IF ON SKIN:
wash with plenty of water.
P305+P351+P338
IF IN EYES:
rinse cautiously with water for several minutes.
remove contact lenses, if present and easy to do. Continue rinsing.
P310
Immediately call a POISON CENTER / doctor.
Contains
PORTLAND CEMENT- Cr (VI) < 2ppm, may produce an allergic reaction.

CE - 19

LEIK SPA - Via Alessandro Volta 10
46040 - Ponti sul Mincio - Mantova
SUPRACAP 8 SC2 GRIGIO - CPR-0041905


EN 998-1
Guaranteed performance plaster mortar for general use (GP) in interior and exterior on walls, ceilings, pillars and partitions

Reaction to fire:
Class A1
Water absorption:
Wc2
Vapor permeability:
µ ≤ 30
Adhesion:
≥ 1N/mm² - FP:B
Thermal conductivity (λ10, dry):
0,45 W/m*K
(tab. mean value; P=50%)
Durability:
NPD
Dangerous substances:
see SDS
GP CS IV